Description
Overview
Touchstone Invisibond Flowing is a clear, two-part epoxy for stone bonding and lamination. Its slower, approximately two-hour set distinguishes it from fast repair adhesives, while the flowing consistency wets out a contained joint.
Features
- Clear epoxy suitable for visible stonework.
- Tintable with Touchstone colorants.
- Exterior-grade formulation for interior or exterior use.
What's Included
- 2 gallons Part A.
- 1 gallon Part B.
Specifications
- Kit total: 3 gallons
- Mix ratio: 2 parts A to 1 part B by volume
- Initial set at 75°F: Approximately 2 hours
- Minimum material and substrate temperature: 55°F
- Approximate spread: 30 sq. ft. per gallon at 50 mils; actual joints vary
Downloads
Applications
For stone patching, mending, bonding, anchor-bolt work and laminating bullnoses or aprons. Select the flowing grade where the assembly retains the liquid adhesive.
Selection and Use
- Use clean, completely dry, dust-free bonding surfaces. Mix only the amount that can be placed promptly; set time is not the same as pot life.
- Avoid loading the joint before full cure. Some yellowing or chalking can occur with ultraviolet exposure.
- Long cold storage can cause a stiff, grainy crystallized appearance. Consult the linked manufacturer reconstitution procedure before using affected material.
