Description
Overview
Touchstone Glacier is a clear or white, fast-setting adhesive for stone fabrication and visible joints. Its knife-grade consistency supports vertical placement, while the cured material can be polished for finished stonework.
Features
- Fast-setting two-component system.
- Low-yellowing formulation for visible stone joints.
- Tintable for matching the stone.
What's Included
- 280 mL cartridge in the selected color, if chosen.
- Quart kit: 1 quart Part A and six 5 oz tubes Part B.
- 2-gallon kit: 1 gallon Part A and four quarts Part B.
Specifications
- Mix ratio: 1 part A to 1 part B by volume
- Pot life at 75°F: 5–10 minutes
- Initial set at 75°F: 10–20 minutes
- Full cure at 75°F: Within 24 hours
- Minimum unmixed-component temperature: 55°F
- Package choices: 280 mL clear or white cartridge, clear quart kit, or clear 2-gallon kit
Size/Color Options
- 280ml Cartridge - Clear
- 280ml Cartridge - White
- Quart Kit - Clear
- 2 Gallon Kit - Clear
Downloads
- Bonstone Touchstone Glacier Adhesive Technical Data Sheet
- Bonstone Touchstone Glacier Adhesive Safety Data Sheet
Applications
For stone seams, miters, laminations and repairs where a light or clear, polishable bond is important. Choose clear or white to suit the stone and the selected cartridge or bulk-kit format.
Selection and Use
- Use on clean, dry, dust-free bonding surfaces. Proportion bulk components equally by volume and mix thoroughly.
- Do not confuse initial set with full cure; avoid stressing the joint prematurely.
- Use a compatible gun and Glacier nozzle for cartridges. Keep Part B sealed against moisture and use accelerator only according to Glacier instructions.
