Description
Overview
Tenax Eliox is an extra-clear, two-part knife-grade epoxy for bonding and filling stone, quartz and ceramic. Both components have a soft, thixotropic consistency, making the mixed adhesive easy to spread without losing its vertical hold.
Features
- Extra-clear appearance for visible joints and repairs.
- Low-yellowing formulation for interior and exterior applications.
- Soft, glossy paste with low odor and low VOC content.
What's Included
- Part A epoxy and Part B hardener.
Specifications
- System: Part A resin and Part B hardener
- Mix ratio: 100 parts A to 50 parts B by weight
- Gel time at 25°C: 10–15 minutes in bulk
- Touch-dry time at 25°C: Approximately 3–3.5 hours in a thin layer
- Minimum time before cutting or polishing at 25°C: 24 hours
- Minimum reaction temperature: 10°C / 50°F
- Storage life: 1 year unopened at 18–25°C
Downloads
- Tenax Eliox Knife Grade Epoxy, Part A & B Technical Data Sheet
- Tenax Eliox Knife Grade Epoxy, Part A Safety Data Sheet
- Tenax Eliox Knife Grade Epoxy, Part B Safety Data Sheet
Applications
For filling and bonding marble, granite, other suitable stone, quartz and ceramics indoors or outdoors. The paste is useful where a flowing epoxy would be difficult to retain in the joint.
Selection and Use
- Weigh the two components; the published 2:1 ratio is by weight, not volume. Mix thoroughly with clean tools and apply to clean, dry material.
- Do not cut or polish when the adhesive merely becomes touch-dry; allow the stated machining interval.
- The manufacturer identifies the cured mastic for food-contact applications under the European provisions stated in the linked technical sheet. Follow the specified mixing and curing conditions.
