Description
Overview
Tenax Domo 10 is a two-component white epoxy paste for stone bonding and repair. Its non-flowing body supports controlled placement on horizontal or vertical work, including suitable interior and exterior installations.
Features
- Two-part epoxy system.
- White paste can be colored with compatible Tenax Universal colorants.
- Suitable for bonding polished stone and appropriate damp-stone applications.
What's Included
- 1 liter of Domo 10 Part A.
- 1 liter of Domo 10 Part B.
Specifications
- Product: Domo 10
- Form: White epoxy paste
- Package: Part A 1 liter plus Part B 1 liter
- Mixing ratio: 1:1 by weight
- Gel time at 25°C: Approximately 2.5 hours
- Touch-dry time: Approximately 4 hours at 25°C and 50% relative humidity
- Cutting/polishing wait at 25°C: 24 hours
- Minimum reaction temperature: 5°C / 41°F
- Service range after hardening: -50°C to +60°C
Applications
For bonding and repairing suitable stone where a white epoxy paste is preferred to a transparent flowing adhesive. Its paste consistency is useful at joints where material must remain in position.
Selection and Use
- Clean away dust and debris, weigh equal amounts of the components and mix thoroughly with clean tools. Keep mixed leftovers out of the original containers.
- Assess tint on the actual stone before making a visible repair.
- The below-freezing service capability applies after hardening, not during mixing or initial cure. Domo 10 can yellow in sunlight; assess that appearance limitation before using it in an exposed white joint.
