null Skip to main content
Need Help? 888-965-6577 x510

Safeboard

SAFEBOARD FMA (Foam Manufacturing Assist)

No reviews yet Write a Review
Peel-and-stick rigid-foam reinforcement for fragile slabs before fabrication. SAFEBOARD FMA’s three-piece WaveTech assembly remains with the slab through handling, fabrication and installation. View full description
SKU:
40.50010
MPN:
APC037
$438.24
  • Fast, Reliable Shipping
  • Expert Product Support
  • 30+ Years of Experience.
SAFEBOARD FMA (Foam Manufacturing Assist)

Description

Overview

SAFEBOARD FMA reinforces fragile slabs before fabrication. Its three-piece WaveTech rigid-foam assembly is bonded to the slab so it can remain in place through handling, fabrication and installation, rather than being a temporary shipping pad.

Features

  • High-density rigid foam helps dampen shock and vibration.
  • WaveTech edges join the pieces into the full panel footprint.
  • Pre-applied pressure-sensitive adhesive for peel-and-stick application.
  • Permanent reinforcement can be installed onto a countertop sub-top with SAFEBOND adhesive.

What's Included

  • 1 × three-piece FMA unit in the selected thickness, assembling to 65 × 128 in.

Specifications

  • Product: FMA — Foam Manufacturing Assist
  • Assembly size: 65 × 128 in.
  • Thickness choices: 10 mm or 15 mm
  • Package: 3-piece unit
  • Manufacturer timing: Application can take under 10 minutes; allow 24 hours of cure before slab handling/fabrication

Size Options

  • 65" X 128" X 10MM (3-PIECE UNIT)
  • 65" X 128" X 15MM (3-PIECE UNIT)

Applications

Use FMA on porcelain and other fragile slabs before fabrication. The bond depends on the slab backing and shop conditions: smooth-backed porcelain is the manufacturer’s preferred PSA surface.

Selection and Use

  • Select thickness for the planned slab assembly, not merely the sheet footprint.
  • Check bonding-surface suitability, dust, temperature and humidity before application. Low-surface-energy backs may require FMA-MAX instead.
  • The manufacturer prohibits PSA application when the porcelain surface temperature is below the dew point plus 5°F.
  • Reinforcement reduces handling risk; it does not eliminate appropriate slab-handling precautions.

Extra Information

Brand:
Safeboard
40.50010:
APC037
40.50011:
APC034

Shipping details

View full shipping policy (opens in a new tab)