Description
Overview
SAFEBOARD FIA reinforces slab pieces after fabrication and before installation. The rigid-foam panel has pre-applied PSA adhesive, providing a support layer that helps dampen handling shocks and vibration without mixing a separate slab-bonding adhesive.
Features
- Peel-and-stick reinforcement for already fabricated pieces.
- Rigid foam supports the piece during handling and installation.
- Manufacturer describes application in under 10 minutes, handling after 30 minutes and full cure in 24 hours.
Specifications
- Product: FIA — Foam Installation Assist
- Thickness: 15 mm
- Sheet sizes: 4 × 8 ft. or 4 × 10 ft.
- Slab bond: Pre-applied pressure-sensitive adhesive
Size Options
- 4' x 8' x 15MM
- 4' x 10' x 15MM
Applications
Choose FIA when the slab has already been fabricated and needs reinforcement for the installation stage. FMA serves the different workflow of reinforcing a slab before fabrication.
Selection and Use
- Clean and prepare the fabricated piece’s bonding surface before removing the adhesive liner.
- Position and bond the panel to the piece, then observe the handling and full-cure times.
- Plan normal safe slab handling; reinforcement is not a guarantee against breakage or injury.