Description
Overview
The Pearl VX10.2XLPRO is a 10 in. professional wet tile saw with a patented telescoping table. It handles 24 in. rip cuts and 18 in. diagonal cuts while retaining a compact saw body; choose Saw Only or Saw with XL Stand.
Features
- 2 HP sealed, belt-driven induction motor with thermal-overload protection.
- Heavy-duty stainless-steel water tray and rail guides.
- Ten sealed metal roller bearings for table movement.
- Rubber-matted cutting table and heavy-duty on/off switch.
- Water-fed cutting system for blade cooling.
What's Included
- 10 in. professional diamond blade.
- Stainless water tray and drip tray.
- Blade wrench, 45°/90° rip guide and miter block.
- Water pump and owner’s manual.
- V35010-UVXL stand only with the Saw with XL Stand configuration.
Specifications
- Model: VX10.2XLPRO
- Motor: 2 HP; 115 V, 60 Hz, single phase; 3,450 RPM
- Blade capacity: 8–10 in.; 5/8 in. arbor
- Maximum rip cut: 24 x 24 in. tile
- Maximum diagonal cut: 18 x 18 in. tile
- Maximum cutting depth: 3-1/4 in.
- Saw-only weight: 84 lb
- Saw-only dimensions: 24 x 22-1/2 x 19-1/4 in.; water tray is 37 in. long
Configuration Options
- Saw Only
- Saw with XL Stand
Applications
For wet cutting porcelain, ceramic and compatible stone tile in residential or commercial installation work. Use the separate rip, diagonal and depth capacities to evaluate the actual pieces and cuts in the project.
Selection and Use
- The 24 in. body length is not the full water-tray footprint; allow for the 37 in. tray and movement of the workpiece.
- Select Saw with XL Stand if the stand is required in this purchase. Saw Only does not include that stand.
- Use a blade appropriate to the tile and maintain the saw’s water-fed cutting setup. A large tile that can rest on the table is not necessarily within every diagonal or depth limit.