DeWalt D36000 High Capacity 10" Tile Saw

Overview

The DeWalt D36000 is a 10-inch high-capacity wet tile saw for larger tile and plank layouts. It provides up to 37-inch rip cuts, or 41 inches using plunge, with 18 inches of clearance to the left of the blade. Choose the saw-only package or the package with a stand.

Features

• Rigid frame, cut-line indicator and stainless-steel rollers for accuracy within 1/32 inch over 30-inch cuts.
• Water-tray coverage accommodates 18 × 36-inch and 24 × 24-inch tiles.
• Integrated storage for cart extension, miter guide and wrenches.
• 28-7/8-inch column-to-cart-edge width for passing through a standard 30-inch door frame.

What's Included

• D36000 wet tile saw.
• DW4764 porcelain tile blade.
• Submersible pump and water pan.
• Side and rear water trays.
• Cutting-cart side extension and angle/rip guide.
• Blade wrench and hex wrench.
• Stand only with the Tile Saw with Stand selection.

Specifications

• Model: D36000
• Blade diameter: 10 in.
• Motor: 15 Amp; 1,220 maximum watts out
• Saw weight: 91 lb
• Rip capacity: 37 in.; 41 in. with plunge
• Left-of-blade clearance: 18 in.
• Crosscut capacity: 8-1/2 in.

Size Options

• Tile Saw Only
• Tile Saw with Stand

Applications

Use the D36000 for larger wet tile cuts where the D24000’s smaller capacity is limiting. The clearance and rip capacity allow a 36 × 36-inch tile to be cut in half; the crosscut capacity suits 6-inch sills and 8 × 48-inch planks at a 30% offset.

Selection and Use

• Check the cut direction and required travel, not only the tile’s longest side. Plunge capacity and normal rip capacity differ.
• The water trays limit overspray within their coverage area; large overhangs still require work-area planning.
• Choose Tile Saw with Stand to include the stand. The saw-only selection does not include it.