Description
Overview
The Sink Hole Saver V6 uses a 4 ft or 7 ft rail to reinforce fragile material from its face. Non-marking 6 in. vacuum cups secure the rail without mechanical edge clamps. Choose manual or automatic operation.
Features
- Concave vacuum cups with triple sealing rings.
- High-flow vacuum release valves.
- Automatic models include a VMP750 rechargeable pump and charger.
What's Included
- SHS-4M-20: One rail, two 6" vacuum cups with covers
- SHS-4A-20: One rail, two 6" vacuum cups with covers, vacuum hose, Rechargeable Vacuum Pump, smart charger
- SHS-7M-20: One rail, four 6" vacuum cups with covers
- SHS-7A-20: One rail, four 6" vacuum cups with covers, vacuum hose, Rechargeable Vacuum Pump, smart charger
Specifications
Type Options
- 4' Manual Sink Hole Saver
- 4' Automatic Sink Hole Saver
- 7' Manual Sink Hole Saver
- 7' Automatic Sink Hole Saver
SHS-4M-20
- Model #: SHS-4M-20
- Product Dimensions: 48" x 5" x 6.5"
- Product Weight: 6.4 lb
- Rated Capacity: 70 lb (32 kg) per cup; 200 lb (90 kg) per rail
- Materials: Aluminum, reinforced polymer, stainless steel, silicone, zinc plated steel
SHS-4A-20
- Model #: SHS-4A-20
- Product Dimensions: 48" x 5" x 6.5"
- Product Weight: 9 lb
- Rated Capacity: 70 lb (32 kg) per cup; 200 lb (90 kg) per rail
- Materials: Anodized aluminum, aluminum, reinforced polymer, stainless steel, silicone, zinc plated steel, polyurethane air tubes
SHS-7M-20
- Model #: SHS-7M-20
- Product Dimensions: 84" x 5" x 6"
- Product Weight: 11.7 lb
- Rated Capacity: 70 lb (32 kg) per cup; 200 lb (90 kg) per rail
- Materials: Aluminum, reinforced polymer, stainless steel, silicone, zinc plated steel
SHS-7A-20
- Model #: SHS-7A-20
- Product Dimensions: 84" x 5" x 6.5"
- Product Weight: 14.3 lb
- Rated Capacity: 70 lb (32 kg) per cup; 200 lb (90 kg) per rail
- Materials: Anodized aluminum, aluminum, reinforced polymer, stainless steel, silicone, zinc plated steel, polyurethane air tubes
Downloads
Applications
Use for reinforcing fragile stone, granite or glass during lifting, transport and installation, including thin pieces, curved countertop layouts, vertical panels and high-low drops where the rail can attach correctly.
Selection and Use
- Observe both limits: 70 lb per cup and 200 lb per rail; include mortar weight.
- Hand lifting only; do not use straps or a forklift.
- Test the hold on clean, dry, dust-free material and monitor plungers during use. Set down and re-pump if a red collar appears.
- Automatic vacuum operation does not remove the need to monitor attachment. Follow the linked guide for porous or textured material.
