Description
Overview
The Omega Diamond Blue Ripper Miter Master Porcelain Panel Version is a light-duty, dual-miter saw for porcelain panels, large-format tile and other thin material up to 1/4" / 6 mm. At approximately 28 lb., it is lighter than the standard 52 lb. Miter Master and is not intended for thick or hard stone cutting.
Features
- Cuts the two 45° miter faces in one pass.
- Lightweight configuration for thin porcelain-panel work.
- Variable-speed compatible Makita motors.
- One-hand water disconnect and plunge capability.
What's Included
- Porcelain Panel Version Miter Master saw
- Two porcelain blades
- Rails are sold separately
Specifications
- Model: 601-684
- Intended material thickness: Up to 1/4" / 6 mm
- Machine weight: Approximately 28 lb.
- Blade capacity: Up to 6", with suitable side protection
- Compatible motor models: Makita 9564CV, 9565CV or 9566CV; exact supplied grinder may vary
- Guide system: Blue Ripper Rails, sold separately
Applications
Use for mitering porcelain panels, large-format tile and similar thin materials within the 6 mm limit. This specialized light-duty version is not recommended for hard stone or thicker slabs; choose a machine designed for those materials instead.
Selection and Use
- Use suitable porcelain blades with side protection. Blade choice affects cut speed, edge chipping and service life.
- Set and align the dual cutting heads according to the manufacturer’s method before production cuts.
- The saw requires compatible Blue Ripper Rails to operate as designed; rails are not included in this listing.
- Do not use a general Miter Master slab-cutting specification as the capacity of this porcelain-panel version.
