Makita 4-1/2" / 5" Cordless Angle Grinder Kit XAG11T

Overview

The Makita XAG11T kit combines an 18V LXT brushless paddle-switch grinder with two 5.0Ah batteries and a rapid charger. Its electric brake stops the wheel in 2 seconds or less after release of the paddle switch, while Automatic Speed Change adjusts speed and torque during use.

Features

• Brushless motor delivers 8,500 rpm.
• AFT shuts off the motor if wheel rotation is suddenly forced to stop.
• Soft start, anti-restart protection and a rubberized grip.
• Spiral bevel gears, internal cooling and wire-mesh intakes.
• XPT helps resist dust and water; it does not make the tool waterproof.
• Star Protection monitors overload, over-discharge and overheating.
• Three-stage tool battery gauge and battery charge-level indicators.
• BL1850B provides up to 65% more runtime than BL1830 and charges in 45 minutes or less with the specified rapid charger.
• 3-year limited warranty on tool, batteries and charger.

What's Included

• (1) 18V LXT® Brushless 4-1/2" / 5" Cut-Off/Angle Grinder (XAG11Z)
• (2) 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B)
• (1) 5" Cut-Off Wheel Guard (126686-3)
• (1) 5" Tool-less Wheel Guard (126687-1)
• (1) 18V LXT® Lithium-Ion Rapid Optimum Charger (DC18RC)
• (1) 5" x 1/4" x 7/8" INOX Grinding Wheel, 36 Grit (A-95962)
• (1) 5" Ultra Thin Cut-Off Wheel, Stainless (B-46165)
• (1) 14" Contractor Tool Bag (831253-8)
• (1) Side Handle

Specifications

• Kit model: XAG11T
• Tool model: XAG11Z
• Wheel range: 4-1/2 and 5 in.
• Battery platform: 18V LXT
• No-load speed: 8,500 rpm
• Spindle: 5/8 in.-11 UNC
• Switch: Paddle/body grip; lock-off, no lock-on
• Electric brake: Yes
• Variable-speed dial: No
• Length: 14-1/4 in.
• Weight with battery: 5.8 lb

Downloads

• Makita Cordless Angle Grinder XAG11 Instruction Manual
• Makita Cordless Angle Grinder XAG11 Tool Flyer

Applications

Use for compatible grinding, cutting and sanding tasks on tile, concrete, pipe or conduit with the correct wheel, guard and dust-control setup. The kit supplies both grinding and cut-off guards; choose the guard for the operation rather than treating them as interchangeable.

Selection and Use

• Use genuine compatible Makita 18V batteries with the Star symbol and the specified charger.
• The rapid charger controls current, voltage and temperature through battery communication; charging time depends on battery condition and temperature.
• Select the appropriate accessory speed rating for 8,500 rpm and follow the linked operating manual.