Description
Overview
The IMER Masonry 350 Smart Cut is a 14-inch brick-and-block saw with a sliding cutting tray and plunge-cutting head. Its 26-inch cutting length extends to 30 inches with a plunge cut, making it useful for longer pavers and masonry pieces as well as conventional bricks and blocks.
Features
- Single-arm layout provides clearance for larger pieces on the cutting table.
- Tray travels on ceramic nylon rollers with sealed bearings.
- Sound-absorbing lining in the blade guard helps reduce blade noise; two thumb screws release the guard for blade access.
- Spring-loaded folding stand and wheel kit support transport and setup.
What's Included
- Masonry 350 Smart Cut saw with 14-inch general-purpose blade.
- 180-degree protractor.
- Integrated spring-loaded stand and wheel kit.
Specifications
- Model: 1188975
- Blade / shaft: 14 in. / 1 in.
- Maximum cutting depth: 4-3/4 in.
- Cut length: 26 in.; 30 in. with plunge
- Cutting table: 20 × 16 in.
- Working height: 33-1/2 in.
- Motor: 2 HP, 115V, 60Hz, 15A, single-phase
- Motor speed: 2,850 rpm
- Water pan / pump: 10 gal. / 3 gpm
- Machine / boxed weight: 175 lb / 215 lb
- Operating size (L × W × H): 47 × 28-1/2 × 51 in.
- Boxed size (L × W × H): 48 × 29 × 55 in.
Downloads
- IMER Masonry 350 Smart Block and Paver Saw Product Sheet
- IMER Masonry 350 Smart Block and Paver Saw Manual
Applications
Use the Masonry 350 Smart Cut for bricks, blocks and paving stones, or for compatible tile work with the appropriate blade. The rolling tray supports the piece during the cut, while the plunge head provides the extra reach identified in the cutting-length specification.
Selection and Use
- Check both material thickness and cut length: the 4-3/4-inch depth and 26-inch regular travel are separate limits.
- The included general-purpose blade is not a substitute for choosing the blade required by a specific material.
- For 45-degree miter work, IMER lists optional miter accessory 1187640; it is not part of the standard package.
- Verify the jobsite supply and follow the manual’s cable requirements; the listed setup guidance calls for a 10-gauge cord.
