Description
Overview
Gemini 1011 is the sliding-tray kit for guided cutting on a Revolution XT. The tray rides on magnetically mounted parallel angle rails and adds a measured setup for square cuts, 45° cuts and circles.
Features
- Two-screw adjustment for aligning square and angled cuts.
- 1/16-inch rule increments on both sides of the blade.
- Measuring system accounts for blade kerf.
- Tray can be flipped to expand the working surface by up to one-third.
What's Included
- Revolution XT slide-tray kit with its magnetic rail arrangement.
- Circle maker.
Specifications
- Part: 1011
- Saw: Gemini Revolution XT
- Rule increments: 1/16 in.
- Circle-maker capacity: Up to 20 in. diameter
- Rail mounting: Magnetic parallel-angle arrangement
Applications
Use this kit for repeated guided straight or angled cuts and circular shapes on the Revolution XT. The tray must travel in line with the blade; the measurements alone do not establish that the setup is square.
Selection and Use
- Set the rail alignment and make a test cut before relying on the rule for repeated work.
- Use the included circle maker for circles within its 20-inch diameter capacity.
- Follow the XT manual’s fore-keel and carriage guidance for straight cutting.
- This is the Revolution XT kit, not Apollo replacement slide tray 1118.
