Description
Overview
The 4-inch Cyclone Electroplated Wet Polishing range combines flexible low-grit electroplated pads with higher-grit resin-bond pads. The thin format is intended to make the pad easier to maneuver across the work.
Features
- Thin construction for flexibility.
- Electroplated bond in 50, 100, 200 and 400 grit.
- Resin bond in 800, 1,500 and 3,000 grit.
Specifications
- Diameter: 4 inches
- Maximum speed: 3,000 RPM
- Use: Wet only
Grit Options
- 50
- 100
- 200
- 400
- 800
- 1500
- 3000
PDE450
- Description: 4", Electroplated bond, 50 Grit
- Max RPM: 3,000
PDE4100
- Description: 4", Electroplated bond, 100 Grit
- Max RPM: 3,000
PDE4200
- Description: 4", Electroplated bond, 200 Grit
- Max RPM: 3,000
PDE4400
- Description: 4", Electroplated bond, 400 Grit
- Max RPM: 3,000
PDE4800
- Description: 4", Resin bond, 800 Grit
- Max RPM: 3,000
PDE41500
- Description: 4", Resin bond, 1500 Grit
- Max RPM: 3,000
PDE43000
- Description: 4", Resin bond, 3000 Grit
- Max RPM: 3,000
Applications
Use the series for wet polishing granite, marble, porcelain, ultra-compact material or quartzite. Choose both the grit and bond appropriate to the polishing stage: the high-grit versions are not electroplated despite the family name.
Selection and Use
- Keep water present during polishing; this is a wet-only series.
- Check the individual model below when replacing a pad so the grit and bond match the intended stage.
- The thin, flexible format suits work where pad maneuverability matters.
