Description
Overview
The DeWalt DW734 is a 12-1/2-inch thickness planer with a three-knife cutter head. A four-column carriage lock, material-removal gauge and thickness scale help control repeat passes, while long infeed and outfeed tables support the board through the cut.
Features
- 15 Amp motor and three-knife cutter head.
- Reversible, disposable knives.
- Four-column carriage lock helps reduce snipe-causing movement.
- 33-1/2 inches of total material support.
- Material-removal gauge, thickness scale and turret depth stop.
What's Included
- DW734 thickness planer.
- Dust hood.
Specifications
- Model: DW734
- Motor: 15 Amp; listed motor speed 20,000 RPM
- Cutter-head speed: 10,000 RPM
- Cuts per inch: 96
- Maximum width: 12-1/2 in.
- Material height: 1/8–6 in.
- Maximum depth per pass: Up to 1/8 in. for boards 5 in. wide or less, per manual specification table
- Feed speed: 24 ft./min.
Downloads
Applications
Use DW734 to bring hardwood or softwood to the thickness needed for furniture, cabinetry and trim. A thickness planer works best with at least one flat reference face; it is not a guarantee that twisted or cupped lumber will emerge flat in one pass.
Selection and Use
- Support long workpieces at entry and exit to help limit snipe.
- Set removal depth for the board width and material; the maximum depth is not a universal full-width cut allowance.
- Use the material-removal gauge and thickness scale when planning successive passes, and follow the manual for knife service.