Description
Overview
The DeWalt DW130V is a 1/2-inch spade-handle drill for low-speed drilling and mud mixing. Its 9 Amp motor runs from 0–550 RPM, while the reversible variable-speed control and adjustable handles help manage the tool during mixing and drilling.
Features
- Variable-speed reversing control helps reduce air bubbles when mixing mud.
- Soft-grip handle.
- Three-position side handle and two-position rear spade handle.
- Ball and needle bearing construction and dust-sealed switch.
What's Included
- DW130V drill.
- 3-position side handle.
- Chuck key with holder.
- 2-position rear spade handle.
Specifications
- Model: DW130V
DEWALT DW130V Specifications
- Chuck Size: 1/2"
- No Load Speed: 0-550rpm
- Amps: 9.0Amps
- Max Watts Out: 600W
- Clutch: No
- Capacity in Wood: (Spade Bit) 1-1/2"
- Gear Reduction: Triple
- Capacity in Wood (Self-Feed): 2-9/16"
- Capacity in Wood (Hole Saw): 5"
- Capacity in Wood (Auger Bit): 1-1/2"
- Capacity in Steel (Twist Bit): 1/2"
- Capacity in Steel (Hole Saw): 3"
- Tool Weight: 7.5lbs
Applications
Use the DW130V for mud mixing and wood or steel drilling within the listed capacities. Its low-speed range is useful for mixing control; it does not mean every material or paddle size can be used without checking the requirements.
Selection and Use
- Choose the bit type first, then compare the appropriate capacity below.
- The three-position side handle and two-position rear handle provide different grip arrangements; this is not a continuously rotating side-handle specification.
- Follow the material supplier’s mixing instructions and use an appropriate paddle. The listed tool weight excludes project materials.
