Description
Overview
Custom White Dry Non-Sanded Grout is an economical Portland-cement grout for narrow joints in porous floor and wall tile. Its fine, non-sanded formulation is intended for soft glazed tile, polished marble and similar finishes that can be scratched by sanded grout.
Features
- For grout joints up to 1/8 in. wide.
- Cures into hard joints with a non-shrinking formulation.
- Meets ANSI A118.6 for non-sanded grout.
Specifications
- Package: 25 lb.
- Color: White
- Maximum joint width: 1/8 in.
- Mixing water: 4.5 quarts cool, clean water per 25-lb. bag
- Application temperature: 50ā100Ā°F
Downloads
Applications
Use for suitable interior or exterior floors, walls, countertops, ceilings, showers, fountains and pools. Select it for narrow joints and finish compatibility rather than using a wide-joint sanded grout on a delicate surface.
Selection and Use
- Confirm suitability with the tile manufacturer and test the finish before grouting. Porous or textured tile may need a pre-sealer or grout release to prevent staining.
- Mix below 300 RPM, allow a 10-minute slake and remix. Do not add water later to restore workability.
- Follow the specified mist-curing procedure; dense tile can extend cure. Protect exterior installations from rain and other wet conditions for at least 7 days above 50Ā°F.
- Use a suitable flexible sealant for movement joints and changes of plane. This cement grout is not intended for harsh-chemical industrial areas or aggressive high-pressure cleaning.
