Description
Overview
The Bison VT tab component serves as a spacer on Versadjust pedestals and can also provide an ultra-low 1/8 in. support where the system permits. Choose the tab width for the required joint between deck units.
Features
- VT18 provides 1/8 in. joint spacing.
- VT316 provides 3/16 in. joint spacing.
- Ultra-low support body for minimal cavity-height applications.
Specifications
- Models: VT18 or VT316
- Ultra-low support height: 1/8 in. (3.2 mm)
- Tab widths: 1/8 in. (3.2 mm) or 3/16 in. (4.5 mm)
- System role: Versadjust spacer tab or approved ultra-low support
Size Options
- 1/8" Tab
- 3/16" Tab
Downloads
- Versadjust Cut Sheet
- Versadjust Specifications
- Versadjust Brace Cut Sheet
- Versadjust Installation Instructions
- Bison Product Line
Applications
Use as the specified spacer component on Versadjust supports, or for an approved ultra-low installation. The 1/8 in. support height is separate from tab width: choosing VT316 produces a wider joint, not a 3/16 in. support body.
Selection and Use
- Confirm the minimum cavity height and the need for adjustment before selecting an ultra-low component. VT does not provide the threaded height adjustment of a V-series pedestal.
- Match joint width to the deck layout and surrounding restraints. Place and modify tabs only as directed in the applicable Bison instructions.
- Verify that the deck units and substrate provide the required support; an ultra-low component is not a complete deck assembly.
