Description
Overview
The Benron 30-200DX stucco sprayer is a hand-held pneumatic hopper gun for applying suitable cementitious and plaster mixes. Its stainless steel hopper holds approximately 1 gallon, with interchangeable air jets and removable spray openings for adapting the pattern and air demand.
Features
- Slide-out four-hole spray tip plate requires no tools for removal.
- Four removable stainless steel air jets simplify cleaning.
- Swivel connection between handle and hopper.
- Narrow-pattern cover bolts and a short adapter for tight work areas.
What's Included
- Stucco hopper gun with four removable stainless steel air jets.
- Four additional smaller brass air jets.
- Two cover bolts for narrowing the spray pattern.
- 1/2 in. × 1/2 in. short adapter.
Specifications
- Model: 30-200DX
- Hopper: Stainless steel; 1 gallon capacity
- Tool weight: 5 lb
- Listed application range: Approximately 1/8 in. heavy texture to 1 in. thick layers, depending on material and technique
- Recommended air supply: 12 CFM at 100 PSI; suitably sized compressor and reservoir
- Small-compressor setup: Use supplied smaller brass jets; catalog lists 4–6 CFM at 90 PSI for this configuration
Warranty
The catalog describes a lifetime anti-rust guarantee for the stainless steel hopper; confirm the manufacturer’s applicable terms.
Downloads
- Benron Stucco Sprayer Hopper Gun Parts List & Instructions
- Benron Stucco Sprayer Hopper Gun Parts Flyer
Applications
Use for compatible stucco, plaster, sand/cement slurries, grout, GFRC, GFRG, EIFS materials, small-scale shotcrete, papercrete and earthen mixes. The catalog also identifies Monokote MK-6, Cafco-300 and other suitable fireproofing materials; confirm the material manufacturer’s approved application method.
Selection and Use
- Compressor airflow, pressure and reservoir size all matter. The linked instructions recommend a 30 gallon reservoir for best performance and describe a minimum 15 gallon setup.
- Change jets for the smaller-compressor configuration; do not treat its airflow as the full-output requirement.
- Cover one or two openings as instructed for narrow patterns, removing the corresponding air jets before installing the supplied bolts.
- Clean after use, dry and store securely. Follow the linked instructions for overhead work, mix consistency and air setup.
