Description
Overview
The IMER 1107010 Stucco and Fine Coatings Gun Kit equips a compatible IMER pump for thinner finish coats such as acrylic stucco and coatings. Interchangeable deflectors let the gun be configured for the material, and the package includes material hose, air hose and cleaning accessories.
Features
- Four deflector sizes for fine-coating work.
- Cam-coupled material hoses and a Geka-coupled air hose are included.
- Hose-connector deflector supports pointing and joint-filling configurations.
What's Included
- Fine coatings/waterproofing spray gun.
- Four deflectors: 5, 6, 8 and 12 mm; one deflector with 16 mm hose connector.
- 16-foot and 33-foot material hoses with cam couplings.
- 53-foot air hose with Geka couplings.
- Spray-gun cleaner tool and 1-1/4-inch (30 mm) sponge.
Specifications
- Part number: 1107010
- Listed pump compatibility: Mighty Small 50 and Koine 35
- Deflectors: 3/16 in. (5 mm), 1/4 in. (6 mm), 3/8 in. (8 mm), 1/2 in. (12 mm)
- Hose-connector deflector: 5/8 in. (16 mm)
- Material hoses: 16 ft and 33 ft; 1 in. (25 mm) with cam couplings
- Air hose: 53 ft × 9/16 in. (13 mm), Geka couplings
Applications
Use this kit for acrylic stucco, fine coatings and compatible waterproofing or finish-coat applications. It serves a different purpose from a rough-coat mortar gun kit: select the gun and deflector around the coating and finish required.
Selection and Use
- Spraying requires a suitable compressor with the pump; the air hose in this kit is not a compressor.
- For tuck-pointing or filling cracks and joints between stones, the gun can be used in a non-spraying configuration without the compressor.
- Confirm the coating, pump and deflector combination before use; fine-coating compatibility is not a claim that all coatings can be pumped.
