Description
Overview
Akemi Stain Repellent Nano-Effect is a ready-to-use impregnation that reduces water, oil, grease and dirt absorption in suitable mineral surfaces while retaining vapor permeability. It develops a water-repellent effect quickly without forming a surface coating. VOC restricted — no California shipping.
Features
- Rapid development of the protective effect.
- Weather-resistant, non-yellowing treatment with little or no color enhancement on most stones.
- Emission class A+; food-contact assessment applies after hardening.
Specifications
- Size: 250 ml
- Coverage: Up to 25 m² per liter, depending on absorbency
- Initial effect: Develops within minutes; original benchmark 10–20 minutes at 20°C
- Full protection: Approximately 2–3 hours
- Application temperature: 10–30°C
Downloads
Applications
Use on compatible natural or artificial stone in kitchens, bathrooms, floors, tables, windowsills, tile joints or facades. Listed surfaces include marble, limestone and Solnhofer stone, sandstone, fine stoneware, cotto, terracotta, unglazed clay tiles and brick.
Selection and Use
- For professional use. Start with a clean, completely dry surface and test appearance and absorption on a sample area.
- Remove all unabsorbed excess before it dries, approximately 20 minutes after application. Protect from moisture during the initial 2–3 hours.
- Not for glazed or non-absorbent surfaces. Excess product can cause spotting or blooming.
- Allow approximately 2–3 days of ventilation when used in food areas. Wipe aggressive spills promptly: impregnation does not make stone impervious to prolonged exposure.
