Description
Overview
The Abaco TS1_110V Stone Saw uses a cast-aluminum working table guided by dual linear bearings on induction-hardened chrome bars. It combines a 10-inch blade format, adjustable 45ā90-degree cutting angle and water delivery for stone and tile cutting.
Features
- Steel stand, wheels and built-in handles assist moving the saw between work areas.
- Powder-coated water pan collects the cutting water.
- Submersible water pump supplies coolant to the blade.
- Thermal circuit breaker provides overload and short-circuit protection.
- The table supports larger tiles, with an adjustable stop guide for positioning.
What's Included
- TS1 saw with steel stand, wheels and built-in handles.
- Submersible water pump.
- Adjustable stop guide.
Specifications
Dimensions
- Length: 41 9/16" (1055 mm)
- Width: 30 3/8" (772 mm)
- Height: 47 13/16" (1215 mm)
- Net Weight: 187 lbs (85 kg)
110 V Motor
- Power: 1.1 kW
- Voltage: 110 V
- Frequency: 60 Hz
- Phases: 1
- Speed: 3400 rpm
Cutting Specifications
- Blade Diameter: 10" (254 mm)
- Cutting Depth at 90Ā°: 2 3/16" (55 mm)
- Cutting Depth at 45Ā°: 1 3/16" (30 mm)
- Cutting Length: 26 15/16" (660 mm)
Water Pump
- Power: 110V/50W
Applications
Use the TS1 for straight and angled stone or tile cuts within its listed cutting envelope. The 110 V single-phase configuration is the model identified for this listing.
Selection and Use
- Check the 26-15/16-inch cutting length against the planned cut, not merely the overall tile size.
- Maximum listed depth is 2-3/16 inches at 90 degrees and 1-3/16 inches at 45 degrees.
- The saw uses a 10-inch (254 mm) blade format and a 110 V/50 W water pump; plan the cutting setup around those specifications.
