Description
Overview
The Abaco MODS1 Site Saw combines a sliding, cast-aluminum work table with dual linear bearings on induction-hardened chrome bars. Choose the listed 3 HP, 110 V single-phase configuration or 5 HP, 220 V three-phase configuration to match the shop or jobsite power arrangement.
Features
- Bolted cast-aluminum working tables.
- Side bench with rollers and two side support arms.
- Wheels and rollers assist moving the saw.
- Direct-drive submersible water pump supplies cutting water.
What's Included
- MODS1 saw in the selected motor configuration.
- Side bench with rollers and two side support arms.
- Submersible water pump; transport wheels and rollers.
Specifications
- Model family: MODS1
- Listed motor options: 3 HP / 110 V / single phase; 5 HP / 220 V / three phase
Size Options
- 3HP 110V Single-Phase
- 5HP 220V 3-Phase
Overall Dimensions
- Length: 62 ⅜" (1585 mm)
- Width: 76 ¾" (1950 mm)
- Height: 56 ⅝" (1439 mm)
- Net Weight: 374 lbs (170 kg)
MODS1-1P Cutting Specifications
- Blade Diameter: Inches: 10" / 11 13/16"; Millimeters: 254 mm / 300 mm
- Cutting Depth at 90°: Inches: 1 15/16" / 2 3/8"; Millimeters: 50 mm / 60 mm
- Cutting Depth at 45°: Inches: 15/16" / 1 3/16"; Millimeters: 25 mm / 30 mm
- Cutting Length: Inches: 41 5/16"; Millimeters: 1050 mm
MODS1-1P Motor and Pump by Region
- Power: USA: 2 kW; International: 2.2 kW
- Voltage: USA: 110 V; International: 220 V
- Frequency: USA: 60 Hz; International: 50 Hz
- Phases: USA: 1; International: 1
- Speed: USA: 3400 rpm; International: 2800 rpm
- Water Pump Power: USA: 110V/50W; International: 220V/50W
MODS1-3P Cutting Specifications
- Blade Diameter: Inches: 10" / 11 13/16" / 13 3/4"; Millimeters: 254 mm / 300 mm / 350 mm
- Cutting Depth at 90°: Inches: 1 15/16" / 2 3/8" / 3 ⅛"; Millimeters: 50 mm / 60 mm / 80 mm
- Cutting Depth at 45°: Inches: 15/16" / 1 3/16" / 1 9/16"; Millimeters: 25 mm / 30 mm / 40 mm
- Cutting Length: Inches: 41 5/16"; Millimeters: 1050 mm
MODS1-3P USA Motor and Pump
- Power: USA: 3.7 kW
- Voltage: USA: 220 V
- Frequency: USA: 60 Hz
- Phases: USA: 3
- Speed: USA: 3400 rpm
- Water Pump Power: USA: 110V/50W
Applications
Use the MODS1 for stone cutting in workshops or construction work areas. Its listed cutting length is 41-5/16 inches (1050 mm), while blade size and cutting depth depend on the selected phase configuration.
Selection and Use
- The 1P cutting table covers 254 mm and 300 mm blades; the 3P table additionally covers a 350 mm blade. Depth values follow the blade-size order shown.
- The listed maximum 90-degree depth reaches 60 mm on the 1P table and 80 mm on the 3P table; at 45 degrees the listed maxima are 30 mm and 40 mm respectively.
- Select the power configuration before ordering. International 1P motor figures are shown separately for reference and do not describe the listed 110 V USA option.
