Zenesis Porcelain Tile Blade

Overview

The Zenesis Porcelain Tile Blade uses patterned diamond placement to maintain a regular cutting sequence as the blade wears. Choose the 5-, 7- or 10-inch version for porcelain tile work, noting that only the 5-inch blade is listed for both wet and dry use.

Features

• Engineered diamond patterns control exposure and support behind the cutting diamonds.
• Patterned layers provide a channel for debris removal.
• Slotted design supports cooler cutting and reduced edge chipping.

Specifications

• Type: Patterned-diamond porcelain tile blade
• Thickness: 0.060 in
• Diameters: 5 in, 7 in or 10 in

Size Options

• 5"
• 7"
• 10"

5-inch — ZLPS10P0506C

• Size: 5 in × .060 in
• Arbor notation: 7/8 in–20 mm–5/8 in
• Cutting method: Wet or dry

7-inch — ZLPS10P0706U

• Size: 7 in × .060 in
• Arbor notation: DM–5/8 in
• Cutting method: Wet only

10-inch — ZLPS10P1008E

• Size: 10 in × .060 in
• Arbor notation: 1 in–5/8 in
• Cutting method: Wet only

Applications

Use for porcelain and other appropriate hard tile cutting. Select by the saw’s blade capacity, arbor and permitted cutting method—not diameter alone.

Selection and Use

• The 5-inch model may be used wet or dry; the 7- and 10-inch models require wet cutting.
• Check the size-specific arbor notation in Specifications against the tool spindle. Do not assume every model uses the same bore.
• Follow the blade and saw instructions for speed and cooling. Patterned diamonds do not eliminate the need for correct setup or guarantee chip-free cuts.