Description
Overview
Woodās Powr-Grip N6450 is a 10-inch concave vacuum hand cup for suitable curved or flat, smooth, nonporous surfaces. The metal-handle design carries a maximum 175-pound rating under the manufacturerās specified conditions and is not intended for thin or fragile material.
Features
- Concave G0750 standard-rubber pad.
- Red-line indicator warns of significant vacuum loss.
- Manual pump attachment and lever release.
- Eligible for the manufacturerās Hand Cup Exchange Program.
What's Included
- N6450 hand cup.
- Protective carrying case.
Specifications
- Model / stock number: N6450 / 91800
- Nominal pad diameter: 10 in (25 cm)
- Maximum load: 175 lb (79 kg), subject to surface and loading conditions
- Minimum curve radius: 13 in (330 mm)
- Minimum material thickness: 1/4 in (6.35 mm) for typical glass handling
- Maximum elevation: 5,000 ft (1,524 m)
- Temperature range: 10ā120Ā°F (-12ā49Ā°C), material and ambient
Downloads
- Wood Power Grip 10" Concave Vacuum Cup Instructions
- Wood Power Grip 10" Concave Vacuum Cup Troubleshooting
- Wood Power Grip 10" Concave Vacuum Cup Specifications
Applications
Choose this cup for suitable curved glass or other smooth, nonporous loads with a radius of at least 13 inches. It can also attach to suitable flat surfaces, though the concave pad may require more pumping. Do not apply it to thin or fragile panels.
Selection and Use
- Attach only to a clean, dry, suitable surface with an intact pad. Porosity, contamination, surface angle and leverage can reduce holding capacity.
- Pump until the red line is hidden and check it frequently during handling. If it reappears, set the load down immediately; repeated vacuum loss requires service.
- Do not lift people, leave an attached load unattended or press the release lever while lifting. Support the load securely before releasing.
- Test sensitive finishes for marking. Keep the cup in its case and inspect the pad, pump and release mechanism before use.
