Description
Overview
The STABILA LAX400 ProLiner kit combines a multi-line laser with a compact elevator tripod. A 360° horizontal line, two vertical lines at 90° and a plumb-down dot provide references for room layout and alignment.
Features
- Fine manual alignment and 360° pivot within the housing.
- Built-in height adjustment and magnetic V-groove wall-bracket attachment.
- Pulsed lines for an optional compatible receiver.
- Aluminum tripod with lifting column, spread limiter, spiked feet and rubber shoes.
What's Included
- LAX400 laser
- 08560 compact elevator tripod
- Target plate
- Wall bracket
- Laser glasses
- Batteries
- Manual
- Kit box
Specifications
- Catalog number: 03360 + 08560
- Laser: LAX400 / 03360
- Tripod: 08560; approximately 27–66 in. working height
- Tripod collapsed length: 30 in.
- Laser weight: 2.2 lb
- Self-leveling range: ±4°
- Leveling tolerance: ±3/8 in. at 100 ft
- Line-straightness tolerance: ±1/4 in. at 100 ft
- 90° angle tolerance: ±3/8 in. at 100 ft
- Runtime: Approximately 10 hours on 4 AA batteries
Applications
Use for transferring a horizontal reference around a room and establishing perpendicular vertical layout lines. The elevator column positions the beam at a chosen height after basic tripod setup.
Selection and Use
- Choose the mounting arrangement for the floor or wall surface.
- The receiver is optional; the kit contents below do not include one.
- Use the correct tolerance for leveling, line straightness or square-angle work rather than treating them as identical.
