Description
Overview
This offset KERDI-LINE tileable covering support carries the shower tile over the linear drain for a discreet drainage line. It is the frameless covering component for the matching offset channel, not the channel body itself. Match its length and outlet configuration to the drain below it.
Features
- Tileable surface blends the drain into the surrounding floor.
- Frameless support sits at the top of the channel body.
- Offset configuration corresponds to the offset KERDI-LINE assembly.
What's Included
- One tileable covering support
Specifications
- Component: Tileable covering support
- Drain arrangement: Off-set outlet KERDI-LINE
- Nominal length choices: 28, 32, 36, 40, 44, or 48 in.
- Visible finish: Supplied by the tile applied to the support
Size and Model Details
- Schluter Part #: KL1DROE70
- Length: 70 cm (27-9/16")
- Schluter Part #: KL1DROE80
- Length: 80 cm (31-1/2")
- Schluter Part #: KL1DROE90
- Length: 90 cm (35-7/16")
- Schluter Part #: KL1DROE100
- Length: 100 cm (39-3/8")
- Schluter Part #: KL1DROE110
- Length: 110 cm (43-5/16")
- Schluter Part #: KL1DROE120
- Length: 120 cm (47-1/4")
Downloads
- Schluter Kerdi-Line Shower System Safety Data Sheet
- Schluter Kerdi-Line Shower System Technial Data Sheet
Applications
Use where an offset linear drain is needed but the finished floor should show a narrow drainage line rather than a metal grate face.
Plan Your Installation
- Confirm that the KERDI-LINE channel has the off-set outlet arrangement identified for this covering support.
- Match the selected length and model to the channel before cutting the finish tile.
- Plan the tile surface on the support to coordinate with the shower floor while retaining the drain openings required by the installation detail.
Common Planning Questions
Is this a finished metal grate?
No. It is a tileable support whose visible surface is finished with your selected tile.
Does it supply the drain channel?
No. The support and the matching channel body are separate components.
