Description
Overview
These DILEX-HKU corner pieces continue the 3/8-inch brushed-stainless cove around an inside or outside 90-degree turn. Choose the fitting for the direction of the corner so the adjoining HKU lengths meet with a consistent rounded surface.
Features
- Preformed 90° corner for the HKU system.
- Brushed-stainless finish.
- Separate inside and outside selections.
Specifications
- Compatible profile: DILEX-HKU
- Cove radius: 3/8 in. (10 mm)
- Angle: 90°
- Configuration: Inside or outside, as selected
- Finish: Brushed stainless steel
- Available type: 3/8" 90° Inside Corner Brushed Stainless Steel / 3/8" 90° Outside Corner Brushed Stainless Steel
Applications
Use where an HKU run changes direction at an internal junction or projecting wall return.
Selection and Fit
- Identify whether each 90-degree turn is an inside recess or an outside projection.
- Match the 10 mm HKU cove radius and brushed-stainless finish, then select the correct direction for each location.
Common Planning Questions
Is an inside corner the same as a three-way vertical-junction fitting?
No. Do not infer a three-way connection from the general corner name; this listing provides the stated inside/outside selections.
Can I choose by stainless material alone?
No. HKU family, radius and turn direction are part of the fit.
