Description
Overview
Schluter DILEX-AHK creates a rounded cove where tiled surfaces meet at an inside corner. Its single anchoring leg is embedded with the tile, while the 3/8-inch radius replaces a sharp corner that can collect dirt. Choose the profile height and aluminum finish to suit the adjoining tile.
Features
- Cove geometry makes floor/wall and backsplash transitions easier to clean.
- One perforated anchoring leg is secured in the mortar bond coat.
- Matching corners, connectors, and end caps finish the run.
What's Included
- One DILEX-AHK cove profile, 8 ft. 2-1/2 in., in the selected height and finish
Specifications
- Length: 8 ft. 2-1/2 in. (2.5 m)
- Cove radius: 3/8 in. (10 mm)
- Listed profile heights: 5/16, 3/8, 1/2 or 9/16 in.
- Material: Anodized or color-coated aluminum, by selection
- Movement condition: Locations where limited movement is expected
- Available size: 5/16" / 3/8" / 1/2" / 9/16"
Downloads
Applications
Use at inside wall corners, countertop-to-backsplash joints, or floor-to-wall transitions in suitable tiled kitchens and bathrooms.
Plan Your Installation
- Identify the inside-wall or floor/wall cove run and confirm that the detail is suitable for a location with limited movement.
- Match the profile height to the adjoining tile and compare the 10 mm cove radius with the intended finish.
- Count inside turns, outside turns, straight joints and open ends before selecting matching AHK accessories.
Common Planning Questions
Is this a flexible movement-joint profile?
This listing is the AHK cove for limited-movement locations. Do not assume the movement capability of a different DILEX family.
Are corners and end caps interchangeable across all DILEX profiles?
No. Choose accessories for the AHK shape and selected finish.
Custom Digital Print Ordering
The Custom Digital Print option is made to order through Schluter myDesign. It does not include a predetermined color or printed design. Supply a physical tile or floor-covering sample, or approved high-resolution artwork, for manufacturer review. Project specifications, any sampling or setup charges, and the printed sample must be approved before production. These custom orders are non-returnable once placed. Contact us to arrange project ordering; the custom print configuration is not available for direct online purchase.
Technical and representative geometry images show the component shape only; they do not depict the final custom print. Standard finishes remain separate selections.
