Description
Overview
Schluter DESIGNBASE-SL DBSL160EB is a tall brushed-stainless wall base installed with adhesive. The 160 mm profile gives the wall perimeter a finished metal surface without painting and can help cover marks left by a previous baseboard. Matching corners and end pieces complete the room detail.
Features
- Brushed V2A stainless-steel surface.
- Adhesive-mounted wall base.
- Optional sealing lip is available separately.
- Matching corner and termination accessories avoid leaving raw profile ends.
What's Included
- DBSL160EB brushed-stainless DESIGNBASE-SL wall-base profile, 160 mm high and 2.5 m long
Specifications
- Part: DBSL160EB
- Height: 6-3/8 in. nominal (160 mm)
- Length: 8 ft. 2-1/2 in. (2.5 m)
- Material: V2A / 304 stainless steel
- Finish: Brushed
- Mounting: KERDI-FIX or suitable installation adhesive
Applications
Use as a finished wall base in suitable residential or commercial interiors.
Plan Your Installation
- Measure the wall-base runs and compare the 160 mm height with the surface to be covered.
- Prepare the wall for the specified adhesive mounting and plan corners, ends and the optional sealing lip before fitting the lengths.
- Choose cleaning products suitable for the stainless finish and avoid the acids/chlorides identified in the care guidance.
- Use suitable non-abrasive cleaners; avoid hydrochloric acid, hydrofluoric acid and chlorides. Verify any project-specific sanitary requirements separately.
Common Planning Questions
Does this profile embed beneath the floor tile?
This DESIGNBASE-SL is an adhesive-mounted wall base, not a tile-edge profile with an anchoring leg beneath the tile.
Is the sealing lip standard equipment?
The sealing lip is an optional, separately selected accessory.