Description
Overview
RUBISCRAPER-250 replacement blades remove cement-based grout using the tool’s nailing-and-tearing action rather than a rotating grinding disc. Select the 1.5 or 3 mm blade for the joint, and resharpen the tungsten-carbide edge when appropriate.
Features
- Interchangeable, resharpenable tungsten-carbide blades.
- Self-guiding design helps follow the grout joint.
- Used with the RUBISCRAPER-250’s controlled-depth removal action.
Specifications
- Compatible tool: RUBI RUBISCRAPER-250
- Available sizes: 1.5 mm (1/16 in.) or 3 mm (1/8 in.)
- Blade material: Tungsten carbide
- Target material: Cement-based grout
- Size: 1/16"(1.5MM); 1/8" (3MM)
Applications
Use for localized grout repairs or removal of cement-based grout before replacement. These are replacement blades for the RUBISCRAPER-250, not blades for a conventional angle grinder.
Selection and Use
- Match blade width to the actual joint so the blade follows the grout rather than the tile edge.
- Control the removal depth with the tool and follow its operating instructions.
- Inspect and resharpen or replace the blade as appropriate; follow the tool’s dust-control and tile-protection instructions.
