Description
Overview
The Omni Cubed Edge Seamer uses two adjustment clamps on a 10 in. rail to level a joint along a stone edge. Rubber bumpers and integrated rail pads allow fine adjustments without relying only on loose shims.
Features
- Fine leveling at the stone edge.
- Can be used alone or with an Omni Cubed seam setter.
- 14ā50 mm clamping range.
What's Included
- One 10" rail with two adjustment clamps
Specifications
- Model #: 101-ES-17
- Product Dimensions: 10ā x 3.5" x 5"
- Product Weight: 2.9 lb
- Clamping Range: 14 mm - 50 mm (0.55" - 1.97")
- Materials: Anodized aluminum, stainless steel, silicone, zinc plated steel
Applications
Use for countertop edge-joint alignment, including correcting twist around sink rails or cutout seams where edge leveling is needed.
Selection and Use
- Check the material thickness against the 14ā50 mm clamp range.
- Position the 10 in. rail where the clamps can engage the edge and the seam remains accessible.
- Use alongside a seam setter when both edge adjustment and seam joining are needed.
