Description
Overview
The Makita HM0870C is an 11.1 lb. corded demolition hammer that accepts SDS-MAX bits. Its 10-amp motor, variable impact rate and 12 bit-angle settings provide a configurable setup for demolition work, particularly horizontal applications.
Features
- Powerful 10 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- Easy-to-operate slide switch increases productivity and allows for continuous use
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Extended life brushes are longer for more work between service intervals and less downtime
- 12 bit angle settings allow the bit to be set at different positions for operating convenience
- Automatic brush cut-off protects commutator from damage for longer tool life
- Rubberized ergonomic soft grip provides more comfort
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
What's Included
- HM0870C demolition hammer.
- (1) Hammer Bit Grease (194683-7)
- (1) Tool Case (824905-8)
- (1) CLOTH F/WIPING OIL (443122-7)
Specifications
- AMPS: 10
- Blows Per Minute (variable speed): 1,100 - 2,650 BPM
- Impact Energy (ft.lbs.): 8.4
- Impact Energy (Joules): 11.4 J
- Vibration Control: No
- Vibration (m/s²): 11
- Noise Level: 98 dB
- Overall Length: 17-3/4"
- Net Weight: 11.1 lbs.
- Bit Type: Accepts SDS-MAX
- Breaker/Demo class: 11
- Power Type: Corded
Downloads
Applications
Designed for demolition with SDS-MAX bits, including horizontal work where tool weight and bit orientation affect handling. The speed dial adjusts the impact rate to the task; the bit-angle settings let you orient the working edge without changing the tool position.
Selection and Use
- Select a bit profile for the material-removal task and confirm its SDS-MAX shank.
- The brush-service indicator gives approximately eight hours’ notice before brush replacement; consult the linked manual for operation and maintenance.
