Laticrete PERMACOLOR Select Grout Base

Overview

PERMACOLOR Select Grout Base is the cementitious component of LATICRETE’s two-part base-and-color system. Combine the selected 10 lb or 20 lb base with the appropriate PERMACOLOR Select pigment pod and water to make the chosen color. It is designed for dense, consistent joints in demanding residential and commercial work.

Features

• Fast-setting, crack- and shrink-resistant grout formulation.
• STONETECH Sealer Technology and antimicrobial product protection.
• Consistent color with reduced efflorescence.
• Low-VOC GREENGUARD certification and available system warranty subject to its terms.

What's Included

• Selected 10 lb or 20 lb bag of PERMACOLOR Select Grout Base.

Specifications

• Joint width: 1/16–1/2 in. (1.5–12 mm)
• Standard: Exceeds ANSI A118.7
• 10 lb base: One 100 g color pod
• 20 lb base: Two 100 g color pods
• Early foot traffic: As little as 3 hours under the specified conditions

• PERMACOLOR Select Base: 10 LB; 20 LB

Downloads

• Laticrete PERMACOLOR Select Grout Base Technical Data Sheet

Applications

Use on tile or stone floors and walls in suitable interior and exterior residential or commercial assemblies. Select the matching color component separately; the base package does not establish the finished color.

Plan Your Installation

• Disperse the pigment pod in the prescribed clean water before adding the base. Use the current data-sheet quantities for the selected bag size.
• Follow mixing, slaking and remixing instructions; do not add extra water merely because the initial mix looks dry.
• Test color and absorption on the actual tile and use the required release/sealing treatment for porous surfaces.
• Choose an industrial grout instead where the project requires chemical resistance, and do not acid-clean colored grout.

Common Planning Questions

Is the Color Kit included?

This listing is the grout base. Order the chosen PERMACOLOR Select Color Kit separately in the correct quantity.