Description
Overview
Gemini 1056 is a 10-inch glass-cutting sintered diamond ring blade for the Revolution XT. Its centerless, double-sided design supports forward and backward cutting and curves down to a 3/8-inch radius.
Features
- Diamond is distributed through the sintered cutting body.
- Centerless ring leaves room for shaped cuts and slices from the edge of a workpiece.
- Two cutting edges allow reversing through a curve.
What's Included
- One Gemini 1056 10-inch ring blade.
- One 1 × 1 × 1-inch dressing stone.
Specifications
- Part: 1056
- Diameter: 10 in.
- Blade type: Glass; double-sided
- Saw: Gemini Revolution XT
- Cutting direction: Forward and backward
- Curve radius: 3/8 in.
- Use: Wet cutting only
Applications
Choose 1056 for glass work on the Revolution XT. The glass-specific blade is the choice for detailed glass shapes, mosaics and decorative pieces; do not assume a chip-free result in every glass or thickness.
Selection and Use
- Plan the cut around the 3/8-inch radius and forward and backward cutting action. The double-sided edge permits backing through the cut without turning the work.
- Use water throughout cutting and follow the saw’s setup instructions.
- Dress the sintered blade as required with the supplied dressing stone.
