Description
Overview
The Flex CS40 WET is a 5-inch masonry saw for wet cutting stone, tile and glass with the appropriate blade. Alongside straight cuts, it accepts compatible concave blades for sink openings and inside-radius work.
Features
- 12-amp motor with integrated water feed.
- GFCI cord supplied for the wet-cutting setup.
- Side handle for two-handed control.
- 0–45° bevel adjustment.
- Accepts compatible concave cutting blades for inside arcs.
What's Included
- CS40 WET saw with side handle
- Water hose and pressure-regulator valve
- GFCI cord
- Spindle wrench and locknut wrench
- Contour-blade adapter and longer adapter bolt
Specifications
- Model: CS40 WET
- Motor: 12 A / 1,400 W
- Maximum blade size: 5 in.
- No-load speed: 12,000 RPM
- Arbor: 7/8 in.
- Bevel range: 0–45°
- Maximum cut depth at 90°: 41 mm — approximately 1.6 in.
- Maximum cut depth at 45°: 26 mm — approximately 1.02 in.
- Motor type: Brushed
Downloads
Applications
Use for countertop fabrication, tile installation and remodeling cuts in suitable granite, porcelain, engineered stone, marble or glass. The manufacturer specifically describes cutting 3 cm granite with the proper blade.
Selection and Use
- Choose a blade for the exact material and for straight or curved cutting as required.
- Check cut depth at the intended bevel angle: the 26 mm figure is a maximum at 45°, not a minimum at 90°.
- Use the specified contour-blade hardware for compatible concave blades.
- The manual excludes metal, wood and plastic cutting. Follow its water-feed, GFCI and workpiece-support instructions.