Description
Overview
The EZ-Sink SB1103 bracket kit supports an undermount sink on adjustable wood rails mounted at the front and back of the cabinet. It can be fitted before or after the countertop is installed, with an included strap for supporting multi-bowl sinks.
Features
- Adjustable rails bring the sink into position beneath the countertop.
- Designed around a standard 24-inch-deep cabinet; wood supports can be trimmed for a smaller cabinet.
- Cabinet-mounted support avoids relying solely on attachments to the countertop.
What's Included
- Two wood support assemblies
- Four wood support hanger brackets
- One multi-bowl support strap
- Two #10 × 3-inch wood screws
- Eight #8 Phillips-head screws
Specifications
- Model: SB1103
- Nominal cabinet depth: 24 inches; supports can be trimmed
- Lower wood pieces: 22-1/8 inches long × 1-1/2 inches high × 7/8 inch wide
- Upper wood pieces: 12-1/4 inches long × 7/8 inch wide
- Mounting location: Front and back cabinet edges
Applications
Use for compatible single- or multi-bowl undermount sinks, including stainless steel, cast iron, composite and porcelain models. Because the rails mount to the cabinet, the system can be used below different countertop materials when the cabinet and sink arrangement provide the required clearance and support.
Selection and Use
- Check the cabinet depth, sink-bowl shape and plumbing clearance before cutting or positioning the rails.
- Fasten the brackets mechanically to the cabinet using the supplied hardware according to the kit instructions.
- Use the multi-bowl strap where required and adjust the supports to hold the sink in its intended position.
- The kit supports the sink; complete the countertop-to-sink seal using the sink and countertop installation requirements.
