Description
Overview
The Cyclone S RockBuster is a 4-inch resin cup wheel with a rounded edge for shaping work. Its 10 mm radius follows the common dressed shape of a silicon-carbide wheel, while an aluminum body keeps the tool light.
Features
- Radius edge for tight sink-radius work.
- 30/50 grits for stock removal; 100/200 grits for seam or miter cleanup.
- Wet or dry use.
Specifications
- Diameter: 4 inches
- Radius: 10 mm
- Body: Aluminum
- Fitting: 5/8-inch–11 thread
- Listed RPM: 5,000
Size Options
- 4" - 30 Grit
- 4" - 50 Grit
- 4" - 100 Grit
- 4" - 200 Grit
PDRX4030
- Size: 4"
- Grit: 30
- Fitting Body: 5/8″-11 thread, aluminum
- RPM: 5,000
PDRX4050
- Size: 4"
- Grit: 50
- Fitting Body: 5/8″-11 thread, aluminum
- RPM: 5,000
PDRX4100
- Size: 4"
- Grit: 100
- Fitting Body: 5/8″-11 thread, aluminum
- RPM: 5,000
PDRX4200
- Size: 4"
- Grit: 200
- Fitting Body: 5/8″-11 thread, aluminum
- RPM: 5,000
Applications
Use the RockBuster for radius shaping and cleanup on concrete, engineered stone, granite, marble or ultra-compact surfaces. Select the rounded edge when the job requires a radius, rather than the square-edge geometry of a flat wheel.
Selection and Use
- Choose 30 or 50 grit for aggressive removal and 100 or 200 grit for finer seam and miter work.
- The 10 mm radius is a tool-geometry detail; compare it with the sink radius being formed.
- Wet/dry capability does not make grinding dust-free. Use the controls required for the material and operation.
