Description
Overview
The DeWalt DW451S2 is a pneumatic lathing stapler for 16-gauge, 1-inch-crown staples. Its 140-staple magazine, adjustable depth guide and tool-free jam release support repeated fastening while keeping fastener setup accessible.
Features
- Tool-free jam release.
- Adjustable depth guide.
- Rubber grip and 5.3-lb tool weight.
- 140-staple magazine.
What's Included
- DW451S2 lathing stapler.
- 1/4-inch air fitting.
Specifications
- Model: DW451S2
- Fasteners: DeWalt/Bostitch 16S2-series staples
- Gauge and crown: 16 gauge; 1 in. crown
- Staple length: 1–2 in.
- Operating pressure: 70–120 PSIG
- Air requirement: 5.3 CFM at 80 PSIG for 100 fasteners per minute
- Tool weight: 5.3 lb
- Magazine: 140 staples
Downloads
Applications
Use DW451S2 for fastening wire mesh to wood for plaster or stucco, plus suitable siding, sheathing, crating and packaging work. Select the fastener to meet the project requirements as well as the stapler’s limits.
Selection and Use
- Match all three dimensions: 16 gauge, 1-inch crown and a supported 1–2-inch length.
- Size the compressor for the intended fastening rate; the stated air consumption is tied to 100 fasteners per minute at 80 PSIG.
- Disconnect the air supply before adjustments, accessory changes or jam service, as directed in the manual.
