Description
Overview
DAP DynaGrip Subfloor is a light-tan construction adhesive for subfloor and deck assemblies. When properly used with the required fasteners, it helps reduce floor squeaks and improve the assembly’s structural performance. Choose a single 28-ounce cartridge or 12-pack.
Features
- Bonds suitable wet, frozen or treated lumber.
- Gunnable, VOC-compliant formulation.
- Meets ASTM D3498 and APA AFG-01 for subfloor installation.
What's Included
- One 28 fl oz cartridge, or 12 cartridges in the 12 Pack.
Specifications
- Cartridge: 28 fl oz
- Color: Light tan
- Application temperature: 40–100°F
- Working time: 15 minutes
- Coverage at 1/4-inch bead: Approximately 86 linear ft per cartridge
- Coverage at 3/8-inch bead: Approximately 38 linear ft per cartridge
- Heavy traffic: Allow 24 hours
- Full cure: Approximately 7 days
Size Options
- Single
- 12 Pack
Downloads
- DAP DynaGrip Subfloor Construction Adhesive Data Sheet
- DAP DynaGrip Subfloor Construction Adhesive Safety Data Sheet
Applications
Use for approved subfloor, deck and wood-to-wood glued floor systems. One bonding surface must be porous. Compatible materials listed in the guide include lumber, plywood, OSB and suitable concrete, masonry or metal within those assemblies.
Selection and Use
- Precut and fit materials before applying a continuous bead. The guide recommends a 3/8-inch bead for subfloor joists.
- Position and press within 15 minutes, then install required nails or screws within 15 minutes of positioning. Adhesive does not replace the fastening schedule.
- For concrete, the guide requires above-grade, dry, fully cured concrete.
- Not for two nonporous surfaces, constant water exposure, foamboard, mirrors or applications outside the specified subfloor/deck scope.