Description
Overview
The Abaco DGM2 and DGM3 Drilling Guides hold a compatible drill on a vertical sliding support for stone-slab drilling. Suction cups secure the aluminum guide body to the slab, allowing the drill holder and head to move up and down at the selected position.
Features
- Aluminum guide body for portability.
- DGM2 uses two suction cups; DGM3 uses three.
- Sliding drill holder supports controlled vertical movement.
- White-rubber suction-contact configuration.
What's Included
- Selected DGM2 or DGM3 drilling guide with suction cups.
- Drill not included.
Specifications
- Body: Aluminum
- Manufacturer warranty: 1 year
Suction Cups Options
- DGM2
- DGM3
DGM2
- Length (inches / mm): 20-1/2" (520)
- Width (inches / mm): 8-7/8" (225)
- Height (inches / mm): 16 inches (407 mm)
- Net Weight (lb / kg): 15.4 lbs (7)
- Drill Fitting Diameter with and without Collar (inches / mm): 1-11/16" (43) - 2-1/16" (53)
DGM3
- Length (inches / mm): 15-9/16" (395)
- Width (inches / mm): 15-15/16" (406)
- Height (inches / mm): 15-13/16" (402)
- Net Weight (lb / kg): 17.6 lb (8 kg)
- Drill Fitting Diameter with and without Collar (inches / mm): 1-11/16" (43) - 2-1/16" (53)
Applications
Use the guide for positioned drilling in granite and compatible stone slabs, including countertop faucet or accessory-hole work with a suitable drill and bit.
Selection and Use
- Check the drill-fitting diameter: the listed with/without-collar sizes are 43 mm and 53 mm. The guide does not fit every handheld drill.
- Choose between the two- and three-cup layouts based on the contact area and guide footprint. Do not assume a third suction cup permits use on porous stone or removes drill and bit limitations.
- The drill is not included. Match the drilling equipment and tooling to the material and operation.