Description
Overview
The Abaco ADE089 dehydrator separates abrasive mud and slurry produced by machining and finishing marble, granite and other stone. Its stainless-steel system combines a pump, mud-holding tank, clean-water tray and replaceable filter bags.
Features
- Automatic float switch.
- Replaceable bags allow the filtration stage to be serviced.
- Stainless-steel construction with nickel-plated brass 2-inch BSP valves.
What's Included
- Pump
- Mud-holding tank
- Clean-water tray
- Filter bags
Specifications
- Catalog configuration: ADE089_110V
ADE089
- Length (inches / mm): 95-13/16" (2433)
- Width (inches / mm): 27-9/16" (700)
- Height (inches / mm): 91-3/4" (2330)
Filtration and Components
- Net Weight: 468.6 lbs
- Float Switch: Automatic
- Bag Dimension: 13-3/4" x 47-1/4"
- Material: Stainless Steel
- Valves: 2" BSP Brass Nickel Plated
- Filter Capacity 25% Sludge in the water: 3m³ / 1 hour
Applications
Use the ADE089 to collect and dewater slurry from stone machining and finishing operations. The filtration-capacity figure is tied to a stated sludge concentration, not a guaranteed rate for every slurry.
Selection and Use
- The listed treating capacity is 3 m³ per hour with 25% sludge in the water.
- Replacement bags are listed at 13-3/4 × 47-1/4 inches; match the bag specification and dehydrator part requirements when replenishing consumables.
- Allow for the 95-13/16-inch length and 91-3/4-inch height when planning the installation area.
